Modify Selection
- Hazard prevention and control:
- Span design
- or
- Pressure arch design
- or
- Roof beam design
- or
- Skin control
- or
- Scaling
- or
- Highwall design
- or
- Pillar design
- or
- Support design and selection
Home Links
Results 31 - 40 of 146
-
9/18/2020 - Contracts and cooperative agreementsA capacity-building contract with the Colorado School of Mines to develope improvements in ground characterization, monitoring, analysis, and design approaches.
-
9/18/2020 - Contracts and cooperative agreementsWest Virginia University will calibrate the LaModel Program to aid in projecting success and accuracy of design methodologies for safe retreat mining.
-
9/16/2020 - Research projectsA project to employ state-of-the-art ground control science, in a targeted program of case studies, to develop engineering solutions for ground control hazards in underground metal mines.
-
7/29/2020 - PublicationsTwo Reports of Investigations provide detailed findings on ground stress redistribution resulting from mining, which could ultimately lead to significant improvements in the stability of mine excavations and ensure a safer working environment for miners.
-
1/1/2020 - Peer reviewed journal articlesA paper presenting a new equation for calculating accurate abutment angles for deeper mining cases. The new equation was tested using both ARMPS2010 and LaModel for the entire case history database of ARMPS2010.
-
1/1/2020 - Peer reviewed journal articlesA study of the loading characteristics of mechanical bolts (stiffness and capacity) installed in coal ribs at five underground coal mines.
-
12/1/2019 - Peer reviewed journal articlesAn overview of recent trends in US longwall mining, with an emphasis on accident and injury trends, as well as support systems and ground conditions.
-
4/2/2019 - Peer reviewed journal articlesA study on the effect of the discontinuity dip direction on square and rectangular hard rock pillars.
-
1/24/2019 - Peer reviewed journal articlesAn article examining rear abutment extent and loading, along with how well current modeling procedures calculate those values.
-
2/15/2018 - Research projectsA project to make available blast damage models and an easy-to-use software tool for mining engineers to use in developing improved blast designs.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program